Seamless countertops for homes, offices, and restaurants enhance the beauty of the whole surrounding. Do you know what the reason is behind their fantastic polished look? It is the most precious stone diamond. Diamond is an essential ingredient that is used for mainly polishing purposes in the manufacturing procedure of countertops. It can finish the top layer, curves, corners of marvel, glass, granite, stone, and even concrete.
For
concrete countertops, diamond polishing pads are mostly used. However, there
are varieties of diamond polishing pads on the market. It is very easy to find
pads that look the same with price ranges from just $ 2 to $ 100. This creates
a big problem for users. It puts them in dilemma to be able to find the best
pads for the value of money. Therefore, to help you through this process this
article will highlight a few things that you should consider when choosing
diamond polishing pads to polish your concrete countertop.
Consider
4 Things Before Choosing Diamond Polishing Pads To Polish
1.
Size Of The Pads
You can
find the different sizes of diamond polishing pads and if must make sure you
are buying the one that is needed for your concrete countertop size. Larger
pads are much more stable on larger and flat surfaces than smaller pads.
However, in narrow areas of concrete, large pads become unstable. The 7-inch
diameter pad does not stay flat or evenly cut on a 3-inch wide concrete strip.
They are also difficult to use at the vertical edge of the countertop.
On the
other hand, small-diameter diamond polishing pads, usually 3-4 inches in
diameter are less stable and more susceptible to scratches when sanding large
areas with large buffs, but small buffs are very good for finishing edges and
narrow sections. All in all, picking the right size depends heavily on the
surface area and the type of finish you desire.
2.
Quality Of The Diamonds
Diamonds
are an expensive and integral part of the polishing pad, so it's fair to judge
quality over price. Usually, industrial diamonds are used in diamond polishing
pads and other diamond tools. They vary based on the grit and grade of the
diamonds. Hence, it becomes very important that you pay attention to your grit
and grade. Any high-grit diamond polishing pads are not good for high-quality
polishing. Making sure you keep in mind the quality of the diamonds for a
smoother experience is very important.
3. Thickness
Diamond
pads are available in a variety of thicknesses, from about 2mm thin to 8mm
thick. Thick diamond polishing pads last a long time, but thick pads are hard
and can become cup-shaped when dry.
In
contrast, the thin pad doesn't last long, more so when aggressive cutting, but
it is more flexible. The thin ones come in handy when honing or polishing with
a curved inset sink. Therefore, depending on the thickness of the pads also
your outcome will be different.
4.
Patterns
In
general, the diamond polishing pads which are used for rough honing should be
an open pattern with wide and deep channels. Such open channels allow quick and
effective ejection of abrasive cutting debris. But, for smooth concrete
countertop polishing, this open pattern pad is not ideal.
The
most ideal pads for polishing are the ones with narrow channels. However, if
you make an aggressive cut and don't drain enough water from under the wheel,
the narrow channels are likely to clog. But, such clogged channels may not pose
a problem as they produce little dust. So, with enough water, narrow channel
pads give the best-finished tool. Therefore, depending on the type of work you
must choose the patterns correctly.
0 Comments