How Much Does It Cost To Restore Water Damage?

Restore Water Damage

Whether it's a flood due to a typhoon or a cyclone, a burst pipe in your home's basement, cracks in the plumbing systems, a leaky roof, or a sewer clog, there are countless possibilities of water damage to your home. What matters the most in any of these water damage scenarios is how quickly you take countermeasures to repair and restore the water damage to your home.

If you let the water stay in your home even just for a few days, the damage may become irreversible. If you act swiftly and precisely by calling the Best Water Damage Restoration Contractors, you will eventually save your home and cash in your pocket. But there is another question that comes to all of the homeowners' minds, how much does it cost to repair water damage. This article has the answer in detail.

Factors That Determine The Cost Of Water Damage Restoration

The cost of repairing water damage varies depending on different factors. The only way to get an accurate answer is to perform a property inspection to identify the extent of the damage. The total cost of water removal and restoration will vary depending on the size of the affected area. Moreover, if a mold repair is also needed, it will add up in the costs.

Plus, the average cost of labor in your area will also make some differences. But you should never use shortcuts during the restoration process, as this can lead to a deterioration in the overall condition of your home. Water damage has great potential for mold growth inside your home. These are some of the most essential factors that affect the cost you pay for water damage restoration.

The Extent Of The Affected Area

The bigger the area affected by the water, the longer it will take to restore the damage. More area will take more time, materials, and manpower to repair an entire house that has been flooded compared to a few square feet of damage. A water-damaged home is frustrating, but it will cost less if you hire the residential mold water damage restoration companies within the proper time.

The larger the affected area, the more dehumidification will be necessary before other work can be done. Likewise, more extensive damage usually means more material will need to be repaired and replaced. Using the average cost per square foot in your area, you can estimate how much the water damage repair job will cost. Here is a small estimate:

Total area and estimated costs:

        50 square feet $ 189 - $ 348

        100 square feet $ 367 - $ 680

        150 sq. Ft. $ 545 - $ 1,039

You can get a feel for it, the larger the area, the more it costs you. But these estimates depend on the region you live in and the labor costs.

If The Water Is Still Standing

If there is still water, it should be removed immediately to prevent further deterioration of the house. This can be done using water pumps, dehumidifying equipment, and wetter absorbent materials. Removing excess moisture adds more time to the reduction process, resulting in additional costs. As soon as the area dries up and excess water is removed, the repair process can begin.

The Water Volume

The volume of water influences the extent of water damage. The water spreads straight and then vertically upwards. The deeper it goes, the more structures and contents it can damage. The amount of water coming out of the washing machine does not compare to the amount of water in a burst hose. As the volume of water increases, so does the cost of water damage repair too.

Category Water Damage

There are some categories of water differentiated by their potential health risks issues.

Category 1

Clean water does not present an immediate health risk.

Category2

Gray water contains chemical, biological, or physical contaminants that present a slight health risk.

Category3

Blackwater is extremely unhealthy and can cause significant health risks.

The costs per square foot are as follows:

        Category 1 drinking water: $ 3.69 / sq. Ft.

        Category 2 gray water: $ 4.38 / ft2

        Category 3 sewers: $ 6.99 / sq. Ft.

If left untreated, clean water will turn to gray water and gray water will turn to black water due to contamination. That's why it's important to start cleaning up water damage as soon as possible. Cleaning gray or black water requires extra safety precautions to avoid contaminating other materials in your home and to prevent technicians from getting sick.

Mold Removal Is Also Necessary And Adds Costs

You will need to hire residential mold water damage restoration companies if mold is already present. Before water damage restoration work can begin, mold repair must be done before proper restoration can begin.

The Time Needed And Accessibility

As the water settles, the chances of it causing more damage and becoming contaminated increase. The sooner the clean-up can begin, the lower the water damage restoration costs. More items can be retrieved if the water is removed immediately. Some areas of a home are more difficult to reach and clean than others. Catering technicians may need to use special equipment to reach a crawl space or attic to remove water.

Post a Comment

0 Comments

close