8 Refrigerator Maintenance Mistakes And How To Avoid Them

8 Refrigerator Maintenance Mistakes and How to Avoid Them

For a homeowner, a refrigerator is a bigger investment. There are no appliances like a refrigerator that performs round the clock without a break. It plays an integral part in a household as it helps to keep your food fresh and out of germs.

Owing to extensive usage, refrigerators may develop issues like defrost problems, cooling problems, broken drain plates, and many more. So, there is a need for periodic maintenance; however, the maintenance has to be systematic.

To keep it running for a long period of time, experts asked to follow some basic maintenance. Here, in this article eight maintenance mistakes will be brought into the light to make you aware; so, read on.

1.      Leaving the Door Open

The first step of maintenance is closing the door properly. People tend to make this mistake very often by leaving the door open. If the door is not closed properly then the temperature will rise which will create tension on the compressor.

To keep the food fresh inside a constant temperature is needed. And to maintain a constant temperature, the motor has to work harder which leads to overheating. So, you need to develop a habit of closing the refrigerator door properly.

If you notice any issue with the door you need to call a professional refrigerator repair service on an immediate basis.

2.     Lack of Ventilation

A refrigerator works round the clock to keep the food cold. To do its task, the motor inside the refrigerator generates heat. Refrigerators need to release the heat and that is why there are vents in the back of the body.

So, the position of the refrigerator is important. You need to place it a little far from the wall so that the ventilator is not blocked. However, often the ventilator gets blocked due to dust and debris which causes a lack of ventilation.

Ventilation is important or else the motor will start malfunctioning. Repairing or replacement of the motor is quite costly. This is the reason one has to pay attention to the placement of the fridge. And you have to clean the ventilator by turning off the refrigerator.

3.     Setting Lower Temperature

As a refrigerator works towards keeping fresh and cool, people tend to set the temperature too low thinking that it will facilitate the cooling process. But in reality, it actually does the opposite.

Due to the low temperature, the motor overworks, and that hurts the refrigerator. To prevent such a thing you need to set the temperature between 35 and 38 degrees Fahrenheit. If you are still confused about the correct temperature, you need to consider the user manual.

4.     Overloading

Every refrigerator comes with a capacity. So, you should avoid overfilling your fridge with food. Overfilling hampers air circulation inside the fridge.

5.     Refrain from Putting Hot Food

You need to avoid putting hot food items in the fridge. The tendency of a refrigerator is to cool down the food to keep it fresh. So, if you refrigerate hot food, the motor will take time to cool down which in return will put a strain on it.

You need to change this habit if you want your fridge to keep going for a long time. So, after cooking you need to let the food cool down before putting it inside.

6.     Lack of Proper Cleaning

As a refrigerator works throughout the time without a break you need to take proper care of it. A refrigerator requires cleaning so that it can function properly. You need to make sure that you clean the drainage system of the fridge. To avoid any kind of mistake during cleaning, you can opt for experts’ advice.

7.     Forget Defrosting

You need to get rid of the frost that gets accumulated inside the fridge. It is a basic step to maintain a refrigerator. Depending on the model this work varies as for an older model you need to defrost periodically. The new models come with a built-in defrost feature so you do not have to do it manually.

8.    Not Replacing the Torn Gasket and Filters

According to a renowned industry professional, you need to replace a few parts of the refrigerators to keep them going. Due to extensive usage often the door starts malfunctioning. It happens when the gasket of the door is torn. If you notice such an issue you need to replace it with a new one.

Most of the new models come with a water filter. If your fridge has one then you need to replace the filter periodically for the sake of basic hygiene.

Wrap Up

So, these are some of the mistakes that people make and you need to be careful with them. You need to contact a skilled technician to replace any part. You need to look for a reliable technician who will not only provide authentic parts but also has significant experience in refrigerator repair and maintenance.

Post a Comment

0 Comments

close