What Are The Signals of A Slab Leak and How Do You Rectify It?

What Are The Signals of A Slab Leak and How Do You Rectify It

What Is A Slab Leak?

A leak in the slab plumbing is often referred to as a slab leak. If you have a house built on a slab foundation, you would know there are plumbing pipelines placed under the slab at the time of construction. Over time, the age of the pipes. The aging depends on the pipe material and its lifespan. When the material starts deteriorating, aging pipes develop cracks easily on the smallest pretext and start leaking. Several other factors could also cause leaks in the slab plumbing.

Such leaks can go unnoticed for a long time. Broken pipes let water penetrate the concrete slab foundation of the house. If such water leaks stay unnoticed for a long time, they can cause fissures in the foundation and dampen or damage the flooring and walls, causing extensive water damage.

Signs of A Slab Leak

If you suspect a slab leak in your home, here are a few ways to find a leak. in your home's water supply, you can find the leak by examining the floor for unusual hot spots. If you have very good carpeted and linoleum floors, it can be easy. With hardwood floors, it will be difficult to find the presence of a slab leak.

A common occurrence of severe slab plumbing flooding is the formation of a "dome" or raised area at the base. While it's a good indicator of where the floor vaults are, it means that the base of your home is badly damaged. If your foundations are swollen, it is important to seek professional help for the repairs and restoration.

If your water bills go up despite normal water usage, it is usually a warning sign of a water leak.

Slab Leak Detection Devices

If the above methods cannot identify the leak, it may be necessary to invest in specialized equipment to detect the leak. Professional plumbers use special acoustics or electronic leak detection devices to identify sources of leak under the slab. These are non-invasive methods to detect the location of the leak.

Leak detection and inspection costs average between $150 and $400, depending on the location of the leak, the need for video pipe inspection and minimal digging.

How To Fix The Slab Leak

When you find a leak in the slab plumbing, how do you fix it? For most people, this process is difficult, confusing, and often expensive. Finding professional services is a good idea as it can solve a lot of problems in the repair process that the average homeowner might not be prepared or well-trained or equipped to handle. Also, as per rules, some kinds of plumbing jobs should only be done by a licensed plumber.

Find The Exact Leak Spot

Before investigating a crack in a concrete slab, you need to determine where the slab water leak will flow. If you're not sure, do not start digging up places in your home to fix the leak. It is important to determine the exact location. You could use specialized leak detection equipment to trace the location from above ground. If you can narrow it down to the right spot, you could then dig up to find the leak in the pipe.

The best way is to get a slab leak repair Placentia company to conduct an expert leak detection and repairs.

Be Well Prepared

Make sure you move all furniture, paintings, carpets, electronics, and valuables from the room, as repairs, will cause a lot of dust particles to float around the room. You would not want to get the furnishing and carpets dirty and later pay for the cleanup.

You should also wear protective equipment, gloves, eye protection, breathing apparatus, heavy clothing, and steel shoes. If possible, it is also a good idea to have a security device available.

Use The Right Equipment

If a rock drill is available, it should be able to reach the area under the slab and make repairs. However, if you do not have the experience or the training to take advantage of this very dangerous tool, do not use it.

A rotating hammer that falls into the hands of an untrained operator can seriously injure both the operator and innocent bystanders. In addition, drill plates can cause unnecessary additional damage to the foundation and pipes of the house. Therefore, it is very important to get professional assistance with the digging up and repair work. Get a slab leak repair Placentia company to conduct a thorough inspection, and offer you the most affordable and durable repair option.

For sewer line leak inspection and repairs, you should always get a slab leak repair Placentia company plumber who is licensed, certified, insured, and experienced. 

Professional Assistance

Attempting a slab leak repair on your own is not without risks. There are numerous things you might not anticipate. Also, several slab plumbing repair jobs need to be done only by licensed plumbers with the required certifications and experience. If water damage exists, you will need to get professional assistance.

Post a Comment

0 Comments

close